Seven Simple Techniques to Change Your Jewel Cases With Vinyl Sleeves

If you would like use vinyl sleeves for your compact disks rather than jewel cases, you should ensure you own the materials and devices prepared, fold the vinyl into a rectangular shape, start sewing the vinyl with a sewing machine, flex the sleeves, transfer a compact disc to the sleeve you developed, transfer any other materials from the jewel case into the sleeve, and close the sleeve.

Jewel cases are commonly utilized as storage for Cds; but, such a device is quite sensitive as well as heavy. They could take up a lot of space and are complicated to take around. The good thing is that you can utilize other types of storage for your Cds including vinyl sleeves. Vinyl sleeves are generally thinner compared to jewel cases and so they consume a lesser amount of space. With this particular storage, your Compact disks are protected from scratches and other damage. Vinyl sleeves allow you to take your Cds more easily and conveniently and you don’t need to bother about breakage. If you would like replace your jewel cases with vinyl sleeves, you can adhere to the following list of techniques:

Ensure you have the supplies as well as tools prepared

For this particular project, you'll require a piece of transparent vinyl that is eleven inches sq . in size, a Cd kept in a jewel case, a pen, a ruler, thread and a sewing machine.

Fold the vinyl into a rectangular shape

You have to find a flat working surface where you may work. Spread the clear vinyl on your work space. Fold the piece of vinyl in half to ensure that it forms a rectangle measuring about five ½ by 11 inches. Use the ruler and pen to mark the center of the particular vinyl perpendicular to the flip with a line.

Begin sewing the vinyl by using a sewing machine

The particular stitch size of the sewing appliance should be set to a long stitch or approximately three to four millimeters in length. You need to stitch a seam which measures a ¼ inch down the shorter ends of the vinyl. Make sure that you stitch a third seam over the line which you labeled on the centre of the middle.

Flex the sleeve

Before you'll go on, you should be sure that the vinyl is flexed and properly stretched. You might need to fold the material close and open and after that flex it.

Move a Compact disk into the sleeve you built

After the sleeve you built has been extended correctly, you may transfer your Cd into it. Open the jewel case and take out the Compact disk you placed inside. Slip the Compact disc into the vinyl sleeve via the opening on one part.

Transfer any other materials from the jewel case into the sleeve

Various Compact disc jewel cases include catalogues and other supplies as well. You might pick which of these pieces of paper you want to preserve and which you wish to discard. After you've decided, you could slide them into the opening of the sleeve which is opposite the Cd.

You can now close the sleeve

After you have placed all the things in the sleeve you wish to preserve, you could close it. Make this happen by folding the sleeve over the stitched seam.

The great thing about this project is that it requires only basic sewing skills and materials that you can readily obtain.